Nov 21, 2025 Leave a message

Chapter One: Pulping

There are mainly three sources of pulp for papermaking :a. Virgin fibers obtained through pulping processes (chemical method, semi-chemical method, mechanical method, chemical-mechanical method, etc.); b. Pulp obtained from commercial pulp boards through crushing methods; Recycled fibers obtained through the waste paper pulping process. Generally speaking, the pulp from the first two sources is not suitable for direct use in papermaking and must undergo further processing. This processing procedure is called the preparation of paper materials in the papermaking process. The main process in paper material preparation is pulping.

By using physical methods to treat the pulp fibers suspended in water, they can be endowed with characteristics that meet the production requirements of paper machines, such as: The process of quickly passing through Polyester forming fabric and Polyester spiral mesh conveyor belt to achieve the expected quality of the produced paper is called pulping. Polyester forming fabric is designed with a specific weave and texture to facilitate the uniform distribution of fibers and the efficient removal of water during the paper-making process. Polyester spiral mesh conveyor belt are used for drying packing paper, cultural paper, board paper and pulp board which be requested with big quantity.

The unpulped slurry contains many fiber bundles. Due to the fact that the fibers are thick and long, with a smooth, hard and elastic surface, the specific surface area of the fibers is small and lacks bonding performance. If the unpulped pulp is directly used for papermaking, it is difficult to achieve uniform distribution on the web. The resulting paper is loose and porous, with a rough surface that is prone to fuzzing and very low bonding strength. The performance of the paper sheet is poor and cannot meet the usage requirements. The paper produced from the paper material processed by Polyester forming fabric and Polyester spiral mesh conveyor belt has a compact and uniform structure and greater strength.

There are mainly two major tasks in pulping


By using physical methods, the fiber suspension in water is mechanically treated, etc., to subject the fibers to shear force, change the shape of the fibers, and endow the pulp with certain characteristics (such as mechanical strength and physical properties), so as to ensure that the products made meet the expected quality requirements.

② By pulping, the water filtration performance of the paper material on the screen is controlled to meet the production requirements of the paper machine.


Pulping is a physical process. The changes in the fiber structure and colloidal substances produced by the pulping effect on the pulp are all physical changes and do not cause chemical changes in the fibers or the generation of new substances. Even the ultrasonic pulping that is currently in the research stage is mainly a physical process.

Pulping itself is a complex and meticulous production process. With the same pulping material, various types of paper and paperboard with different properties can be produced depending on the pulping equipment, pulping methods, pulping techniques and operations. In other words, the same product can also be produced by using different raw materials and different pulping processes. Papermaking workers should propose corresponding pulping methods and approaches based on the type of pulping equipment, the types and proportions of raw materials, product quality requirements, and the production conditions of paper machines, and constantly summarize experience in actual production to better improve product quality.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry